Ruijie Networks RG-S2600E Series Cli Reference Manual page 831

S2600E CLI Reference Guide
monitored-host-limit number
Parameter
description
Default
Settings
Command
mode
Usage
guidelines
Examples
Related
commands
15.7.6 monitor period
Use this command to set the monitoring time.
monitor-period seconds
Chapter 15 NFPP Configuration Commands
Parameter
number
1000
NFPP define configuration mode
If the monitored host number has reached the default
1000, the administrator shall set the max-number smaller
than 1000 and it will prompt the message that
value that you configured is smaller than current
monitored hosts 1000, please clear a part of monitored
to remind the administrator of the invalid
hosts.
configuration and removing the monitored hosts.
When the maximum monitored host number has been
exceeded, it prompts
NFPP_DEFINE-4-SESSION_LIMIT: Attempt to exceed limit of
name's 1000 monitored hosts
Ruijie(config)# nfpp
Ruijie(config-nfpp)# nfpp define tcp
Ruijie(config-nfpp-define)#monitored-host-limit 500
Command
show nfpp define
summary
Description
The maximum monitored
number. The valid
1-4294967295.
the message
. to remind the administrator.
Description
Show the
anti-attack configurations
host
range is
%ERROR：The
that
% %
user-defined