Ruijie Networks RG-S2600E Series Cli Reference Manual page 529

S2600E CLI Reference Guide
The following example shows how to define the RADIUS
Calling-Station-ID attribute as IETF format:
Examples
Ruijie(config)# radius-server attribute 31 mac format
ietf
Command
Related
radius-server
commands
host
2.1.3 radius-server host
Use this command to specify a RADIUS security server host. The no form of this command is
used to delete the RADIUS security server host.
radius-server host { ipv4-address | ipv6-address} [auth-port port-number] [acct-port
port-number] [test username name [idle-time time] [ignore-auth-port] [ignore-acct-port]]
no radius-server host { ipv4-address | ipv6-address}
Parameter Parameter
description
hostname
ip-address
auth-port
port-number
acct-port
port-number
test
name
Chapter 2 RADIUS Configuration Commands
Description
Define the RADIUS server.
Description
DNS name of the RADIUS security
server host.
IP address of the RADIUS security
server host.
UDP port
authentication.
Number of the UDP port used for
RADIUS authentication. If it is set to 0,
this host
authentication.
UDP port
accounting.
Number of the UDP port used for
RADIUS accounting. If it is set to 0, this
host does not perform accounting.
(Optional) Enable the active detection
username to the RADIUS security server and
specify the username used by the
active detection.
used for RADIUS
does not perform
used for RADIUS