Ruijie Networks RG-S2600E Series Cli Reference Manual page 984

Table of Contents

Advertisement

S2600E CLI Reference Guide
Commands
Example 2: Show the details of warm reload when warm reload is enabled but is not
running.
Ruijie#show warm-reload
Warm Reload configuration state:
Warm Reload running state:
Example 3: Show the details of warm reload when warm reload is disabled.
Ruijie#show warm-reload
Warm Reload configuration state:
Warm Reload running state:
max reload count
min uptime
warm reload count
uptime
warm-reload {enable | count number] |
uptime minutes}
Related
reload warm
Commands
reset warm module slot
show warm-reload
Chapter 4 Warm Reload & Upgrade Configuration
Uptime: 234(s)
Warm reload is enabled.
Max reload count: 10
Min uptime: 60(s)
Warm Reload is open and saved.
Warm reload is disabled.
Max reload count: 10
Min uptime: 60(s)
Warm Reload is close.
Field
Maximum times of consecutive warm reloads between two
cold reboots
Minimum interval from the system becomes stable to the
warm reload.
Warm reload times
Time interval between system configuration completion to
the current time
Command
Description
Description
Configure the warm reload function.
Warm reload / upgrade the overall
system.
Execute the Warm reload on the line
card.
Show the operation history, current
state, and statistics of warm reload.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RG-S2600E Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents