Ruijie Networks RG-S2600E Series Cli Reference Manual page 832

S2600E CLI Reference Guide
Parameter
description
Default
Settings
Command
mode
Usage
guidelines
Examples
Related
commands
15.7.7 nfpp define
Use this command to create the user-defined anti-attack type.
nfpp define name
Parameter
description
Chapter 15 NFPP Configuration Commands
Parameter Description
seconds
Set the monitor time, in seconds. The
valid range is [180, 86400].
600s
NFPP define configuration mode.
When the attacker is detected, if the isolate period is
0, the attacker will be monitored by the software and the
timeout time will be the monitor period. During the
software monitoring, if the isolate period is not 0, the
software-monitored attacker will be auto-isolated by the
hardware and the timeout time will be the isolate period.
The monitor period is valid with the isolate period 0.
If the isolate period has changed to be 0, the
attackers on the interface will be removed rather than
being monitored by the software.
Ruijie(config)# nfpp
Ruijie(config-nfpp)# nfpp define tcp
Ruijie(config-nfpp-define)#monitor-period 1000
Command
show nfpp define
summary
Parameter
name
Description
Show the user-defined
anti-attack configurations
Description
Name of the user-defined
anti-attack type.