Ruijie Networks RG-S2600E Series Cli Reference Manual page 345

S2600E CLI Reference Guide
snmp-server system-shutdown
no snmp-server system-shutdown
Default
configuration
Command
mode
Usage
guidelines
Examples
1.1.12 snmp-server trap-source
Use this command to specify the source of the SNMP trap message in the
global configuration mode. The no form of this command is used to restore it
to the default value.
snmp-server trap-source interface
no snmp-server trap-source
Parameter
description
Default
configuration
Command
mode
Chapter 1 SNMP Configuration Command
Disabled.
Global configuration mode.
This command is used to enable the SNMP system restart
notification function. The RGOS sends the SNMP trap
messages to the NMS to notify the system pending before
the device is reloaded or rebooted.
The example below enables the SNMP system restart
notification function:
Ruijie(config)# snmp-server system-shutdown
Parameter Description
Interface to be used as the source of
interface
the SNMP trap message
The IP address of the interface where the NMP message
is sent from is just the source address.
Global configuration mode.