Ruijie Networks RG-S2600E Series Cli Reference Manual page 134

S2600E/P CLI Reference Guide
Commands
Platform
description
3.2 Showing Related Command
3.2.1 show aggregateport
Use this command to display the aggregate port configurations.
show aggregateport {[aggregate-port-number] summary | load-balance}
Parameter
description
Command
mode
Usage
guidelines
Examples
Related
commands
3.3 Configuration Example Showing Command
3.3.1 aggregateport help
Use this command to display the typical configurations of AP modules.
Chapter 3 Aggregate Port Configuration
-
Parameter
aggregate-port-number
load-balance
summary
Privileged mode.
If the aggregate port number is not specified, all the
aggregate port information will be displayed.
Ruijie# show aggregateport 1 summary
AggregatePort MaxPorts
------------- --------
Ag1 8
Command
aggregateport
load-balance
Description
Number of the aggregate port.
Show the load-balance algorithm
on the aggregate port.
Show the summary
aggregate port.
SwitchPort Mode
-------------
Enabled ACCESS
Description
Configure a load-balance
algorithm of AP.
of the
Ports
------