Ruijie Networks RG-S2600E Series Cli Reference Manual page 552

S2600E CLI Reference Guide
4
4.1 dot1x Active
Authentication
Command
4.1.1 dot1x auto-req
Use this command to configure 802.1X active authentication function in the global
configuration command. The no form of this command disables the automatic authentication
function.
[no] dot1x auto-req
Default Enabled
Command
mode Global configuration mode.
This command is used to actively initiate 802.1x
Usage
authentication on the device. Use the show dot1x
guidelines
auto-req command to view the setting of this function.
The following example sets the device to automatically
initiate 802.1x authentication:
Ruijie# configure terminal
Ruijie(config)# dot1x auto-req
Ruijie(config)# end
Examples
Ruijie(config)# show dot1x auto-req
Auto-Req: Enabled
User-Detect : Enabled
Packet-Num : 0
Req-Interval: 30 Second
Command
Related
Chapter 4 802.1X Configuration Commands
802.1X
Commands
Description
Configuration