Ruijie Networks RG-S2600E Series Cli Reference Manual page 182

S2600E/P CLI Reference Guide
Examples
Related
commands
9.1.8 voice vlan security enable
Use this command to enable the Voice VLAN security mode in the global
configuration mode. Use the no form of this command to disable the security
mode.
voice vlan security enable
no voice vlan security enable
Chapter 9 Voice VLAN Configuration Commands
phone type connected downward the port or the port type.

Caution
1. With the Voice VLAN enabled on the port and in the
manual mode, this port must be added to the Voice VLAN
manually to ensure the function validity.
2. When the port works in the auto-mode, note that the
native VLAN of the port cannot be set as the Voice VLAN
for the normal function performance.
3. The Trunk Port/Hybrid Port on the Ruijie product can
transmit the packets in all VLANs by default. First remove
the Voice VLAN from the allowed VLAN list for the port,
then enable the Voice VLAN to ensure that the port
disconnecting with the voice device cannot be added to
the Voice VLAN, or the port not used for a long time can
be still in the Voice VLAN.

Note
1. With the Voice VLAN enabled on the port, the auto
and manual modes switchover is disallowed. Disable the
Voice VLAN first if it is necessary to switch the modes.
2. In the auto mode, it fails to add/remove the port
to/from the Voice Vlan by using the command.
The following example shows how to set the Voice VLAN
on the interface FastEthernet 0/1 work in the auto mode:
Ruijie(config)# interface fastEthernet 0/1
Ruijie(config-vlan)# voice vlan mode auto
Command
show voice vlan
Description
Show Voice VLAN configurations
and the current state.