Sirona Dental Systems GmbH
Service Manual ORTHOPHOS SL
64 95 258 D3632
D3632.076.01.03.02 09.2016
9.2.2
Removing board DX32
1. Unscrew the bracket (C). The bracket (C) is located in front of board
DX32.
2. Move the stand to a height of 1260 (control panel display)
3. DANGER! Potentially lethal shock hazard! Disconnect the unit from
the junction box of the building installation.
4. Remove the cable ties (A) from cable L2.
5. Loosen all the left-hand screws (B) of the protective plates (E).
6. Unscrew the remaining screws from the protective plates (E).
7. Remove the covering plates (E) (top and bottom) from the connection
box (F) of board DX32.
9.2 Height adjustment motor (M1_4)/spindle
9 Repair
335