Sirona ORTHOPHOS SL 2D Service Manual page 432

10 Maintenance
10.11 Test exposures/Test images
432
"Start acquisition"
6. Click on the
Exposure readiness is established. A dialog window displays the
status of readiness to exposure.
The service routine used for the corresponding exposure is
displayed on the control panel, along with the specific exposure
parameters.
7. Press the release button. Press and hold down the button until the
exposure is complete, the preview image is displayed in the exposure
window, and the acoustic signal that indicates the end of the
exposure (double beep) sounds (if it has been configured).
The exposure is displayed in the exposure window.
For notes on evaluating the exposure, refer to the technical
documentation for acceptance/constancy testing.
8. Remove the needle phantom again with the constancy test phantom.
Sirona Dental Systems GmbH
Service Manual ORTHOPHOS SL
button.
64 95 258 D3632
D3632.076.01.03.02 09.2016