Sirona ORTHOPHOS SL 2D Service Manual page 108

5 Messages
5.4 List of error messages
Error code Description
E6 13 67 Error when activating temple
support motor
Error code Description
E6 13 68 Error when activating temple
support motor
Timeout of FPGA on board DX1.
FPGA = Field Programmable Gate
Array
Error code Description
E4 13 69 Temple support drive defective.
Error code Description
E6 13 70 Cables for bite block electronics not
connected.
Error code Description
E1 13 71 Signal error for angle acquisition
(incorrect ADC values).
Error code Description
E6 13 72 Malfunction of the bite block
electronics or wiring.
108
Actions required
E6 13 67
● Restart the unit:
1. Switch off the unit.
2. Wait 1 minute.
3. Switch on the unit.
4. Repeat procedure and check function.
● Please contact the Sirona Customer
Service Center (CSC) to find out whether
a bug fix by means of a software update is
possible and perform such an update if
necessary.
● Check headrest mechanics, replace if
necessary.
● Replace board DX1.
Actions required
E6 13 68
● Acknowledge error.
If the error occurs repeatedly ...
● Replace board DX1.
Actions required
E4 13 69
● Replace the headrest.
Actions required
E6 13 70
Tip: Service routine S018.8 can be run as an
aid.
● Check cabling and plug connection.
Actions required
E1 13 71
● Run service routine S18.9 to readjust the
values.
● Replace board DX51 in the support piece
(bite block holder).
● Replace board DX1.
Actions required
E6 13 72
Tip: Service routine S018.8 can be run as an
aid.
● Replace board DX51 in the support piece
(bite block holder).
● Replace board DX1.
Sirona Dental Systems GmbH
Service Manual ORTHOPHOS SL
see
S. [ → 68]
S. [ → 347]
S. [ → 396]
see
S. [ → 396]
see
S. [ → 347]
see
S. [ → 295],
S. [ → 153]
see
S. [ → 297]
S.
S. [ → 396]
see
S. [ → 295]
S.
S. [ → 396]
64 95 258 D3632
D3632.076.01.03.02 09.2016