Sirona ORTHOPHOS SL 2D Service Manual page 91

Sirona Dental Systems GmbH
Service Manual ORTHOPHOS SL
Error code Description
E6 07 06 Module failed in TTP (detected on
master side).
This error may also occur in
connection with other causal error
messages! Please also observe the
causal error message! It appears
only after you acknowledge the first
error message.
TTP = Time Trigger Protocol
Error code Description
E6 07 07 TTP-Timeout error (detected on
slave side).
The module was temporarily not
addressed by the master:
● Undervoltage on the master
side
● Procedure error in the software
● Master (DX11) receives no
return commanding from the
module
This error may also occur in
connection with other causal error
messages! Please also observe the
causal error message! It appears
only after you acknowledge the first
error message.
TTP = Time Trigger Protocol
Error code Description
E6 07 08 General fault detected locally on
module (slave side). CAN controller
being reinitialized.
64 95 258 D3632
D3632.076.01.03.02 09.2016
Actions required
E6 07 06
● Check the CAN bus.
● Please contact the Sirona Customer
Service Center (CSC) to find out
whether a bug fix by means of a
software update is possible and
perform such an update if necessary.
● Replace Easypad (DX7).
Actions required
E6 07 07
● Check the CAN bus.
● Check power supply of board DX11;
measuring point 3.3 V on board DX1
(see wiring diagrams)
If 3.3 V is present ...
● Replace board DX11.
If 3.3 V is not present ...
● Replace board DX1.
Actions required
E6 07 08
● Check the CAN bus.
● Check software versions on the info
screen or the "Unit information";
perform software update, if necessary.
● Replace Easypad (DX7).
● Please contact the Sirona Customer
Service Center (CSC) to find out
whether a bug fix by means of a
software update is possible and
perform such an update if necessary.
5 Messages
5.4 List of error messages
see
S. [ → 141]
S. [ → 68]
S. [ → 349]
see
S. [ → 141]
S. [ → 397]
S. [ → 396]
see
S. [ → 141]
S. [ → 59],
S. [ → 68]
S. [ → 349]
S. [ → 68]
91