Sirona ORTHOPHOS SL 2D Service Manual page 336

9 Repair
9.2 Height adjustment motor (M1_4)/spindle
336
8. The cable L3 can stay on the top covering plate (E).
9. Remove connector X2 from board DX32 and remove the protective
conductor.
10. Remove cable L2 from terminal X100 and pull it downwards from out
of the connection box (F).
11. Remove connector X1 from board DX32.
12. Loosen the two left-hand screws (G).
13. Loosen the two screws on the right (I) and remove the connection box
including board DX32.
Sirona Dental Systems GmbH
Service Manual ORTHOPHOS SL
64 95 258 D3632
D3632.076.01.03.02 09.2016