Laser Area Display (Vol); Replacing The Laser Area Display (Vol) - Sirona ORTHOPHOS SL 2D Service Manual

9 Repair
9.7 Laser light localizers
C
362
9.7.4

Laser area display (VOL)

Replacing the laser area display (VOL)

9.7.4.1
1. Remove the "Top arm" and "Front slide" covers [ → 37].
2. Remove the cable of the defective laser area display (C) from
connector X1500 on board DX1 and loosen the cable from the cable
holders.
3. Loosen the thread (B) slightly (approx. 3 - 4 turns).
B
B
4. Remove the defective laser area display from the struts of the cast
part (H).
H
Sirona Dental Systems GmbH
Service Manual ORTHOPHOS SL
64 95 258 D3632
D3632.076.01.03.02 09.2016