S018: Service For Height Adjustment; S018: Test Step 2 - Sirona ORTHOPHOS SL 2D Service Manual

Sirona Dental Systems GmbH
Service Manual ORTHOPHOS SL
SR*
S018
S018.2
S018.3
S018.4
S018.5
S018.6
S018.7
S018.8
S018.9
S018.10
64 95 258 D3632
D3632.076.01.03.02 09.2016
8.1.15

S018: Service for height adjustment

SA** Function
Service for height adjustment
No Set the maximum travel height
No Undo the maximum travel height setting
No Check the height adjustment sensor system
No Setting the minimum travel height
No Undoing the minimum travel height setting
No Nominal angle setting for the occlusal bite block (as required by the
customer)
No Functional test of the occlusal bite block
No Calibrating the occlusal bite block
No Setting the PWM values for the height adjustment creep speed (PWM =
Pulse Width Modulation)
* SR=service routine, ** SA=security access
8.1.15.1

S018: Test step 2

NOTE: Limiting the max. travel height is only possible from a position
value of >1500.
Set the maximum travel height
1. Move the unit to the required maximum travel height by pressing the
Up/Down keys in the user mode on the control panel.
2. Call service routine S018.2.
3. To save the maximum travel height, touch the Memory key (B) (R key
(C) lights up) followed by the R key (C).
8.1 Perform service routines via the control panel
Once the service routine has been selected, the current height
position is displayed in selection field 1.
The Memory key (B) lights up.
8 Service routines
289