Sirona ORTHOPHOS SL 2D Service Manual page 340

9 Repair
9.2 Height adjustment motor (M1_4)/spindle
340
3. Attach cable L2 first to the lower strain relief (photo on the left) and
then to the upper strain relief (photo on the right) (Q) of board DX32.
4. Connect cable L2 to board DX32 (R) and attach the protective ground
wire (S).
5. Run cable L3 (T) and the motor cable (U) around the height
adjustment motor.
Sirona Dental Systems GmbH
Service Manual ORTHOPHOS SL
64 95 258 D3632
D3632.076.01.03.02 09.2016