Occlusal Bite Block; Replacing The Occlusal Bite Block; What Has To Be Done After Replacing The Occlusal Bite Block - Sirona ORTHOPHOS SL 2D Service Manual

Sirona Dental Systems GmbH
Service Manual ORTHOPHOS SL
64 95 258 D3632
D3632.076.01.03.02 09.2016
9.8

Occlusal bite block

9.8.1

Replacing the occlusal bite block

➢ Replace the defective occlusal bite block with the new one.
9.8.2 What has to be done after replacing the occlusal bite
block?
1. Switch the unit on.
2. Perform adjustment of the AD acceptance angle values using service
routine S018.9 [ → 297].
3. Check the function of the occlusal bite block.
9 Repair
9.8 Occlusal bite block
367