10 Maintenance
10.11 Test exposures/Test images
450
5. Press the release button. Press and hold down the button until the
exposure is complete, the preview image is displayed in the exposure
window, and the acoustic signal that indicates the end of the
exposure (double beep) sounds (if it has been configured).
The exposure is displayed in the exposure window.
For notes on the evaluation of the exposure, refer to technical
documentation for acceptance/constancy testing.
6. Remove the test phantom again.
Sirona Dental Systems GmbH
Service Manual ORTHOPHOS SL
64 95 258 D3632
D3632.076.01.03.02 09.2016