Sirona ORTHOPHOS SL 2D Service Manual page 169

Sirona Dental Systems GmbH
Service Manual ORTHOPHOS SL
Resetting adjustment/calibration and
data backup
2D adjustment (panoramic)
3D adjustment/calibration (volume)
64 95 258 D3632
D3632.076.01.03.02 09.2016
7.1.2.2.1 Navigation area
The navigation area contains a structure tree similar to the one you will
be familiar with from your Windows interface. The structure tree contains
all stages of the adjustment and calibration procedure you need to
complete in order to adjust and calibrate your system.
IMPORTANT: You must perform adjustment and calibration of the unit in
the order as described in the section "General information on unit
adjustment and calibration [ → 162]".
Structure tree
"Reset Pan"
●
"Reset Ceph"
●
"Reset 3D"
●
"Sensor adjustment"
●
"Diaphragm adjustment"
●
"Symmetrie adjustment"
●
"Sensor calibration (DCS)"
●
If a cephalometer is installed:
"Adjustment of Ceph primary diaphragm"
●
"Adjustment of Ceph secondary diaphragm"
●
"Adjustment of Ceph secondary diaphragm (Quickshot)"
●
"Adjustment of Ceph main beam direction"
●
"Adjustment of earplug alignment"
●
"Sensor adjustment"
●
"Diaphragm adjustment"
●
"Sensor calibration"
●
"Diaphragm calibration"
●
"Geometry calibration"
●
"Dose measurement"
●
7 Unit adjustment and calibration
7.1 General information on unit adjustment and calibration
169