Sirona Dental Systems GmbH
Service Manual ORTHOPHOS SL
64 95 258 D3632
D3632.076.01.03.02 09.2016
IMPORTANT
Possible assembly errors
The one end piece has been removed to make the new energy chain
easier to lay .
The missing end piece is enclosed.
➢ Attach this end piece to the energy chain only when the energy
chain has been laid in the stand.
3. Screw down the mains filter plate.
4. Screw the new energy chain down in the position (marking) of the old
energy chain.
5. Screw the power cable (A) to the terminal K1 and the strain relief.
6. Route the external PE cable (B) over the mains filter plate through the
ferrite core twice (C) (two hoses).
7. Screw the external PE cable (B) down on the ground bolts (D).
9 Repair
9.16 Cable
403