Sirona ORTHOPHOS SL 2D Service Manual page 132

5 Messages
5.4 List of error messages
Error code Description
E5 81 63 Ceph: Error when writing to
EEPROM.
Stored data may be lost.
Error code Description
E6 81 70 Ceph: The sensor type on the ceph
slot is not compatible with SIDEXIS
4 specifications.
Error code Description
E7 81 71 Ceph: File system error on DX81C
Error code Description
E6 81 73 Ceph: Sensor in ceph slot active on
CAN bus, but no hardware detection
Error code Description
E5 81 74 Ceph: Sensor in ceph slot not
detected.
Error code Description
E5 81 75 Ceph: Error while synchronizing
image data
132
Actions required
E5 81 63
● Acknowledge error and repeat procedure.
● Run software update.
If the error occurs repeatedly ...
● Check log memory (Unit information
[ → 59]).
● Check ceph sensor (replacement sensor),
replace sensor if necessary.
Actions required
E6 81 70
● Check the SIDEXIS 4 specifications with
the Sirona Customer Service Center
(CSC).
● Check the version compatibility of the unit
software and SIDEXIS 4, perform software
update if necessary.
● Pull ceph sensor out of slot and plug it
back in, repeat procedure.
Actions required
E7 81 71
● Run software update.
Actions required
E6 81 73
● Check cable L35/L38, replace if
necessary.
● Check connector X500 on board DX1,
replace board DX1 if necessary.
● Check ceph sensor holder, replace if
necessary.
Actions required
E5 81 74
● Check cable L35/L38, replace if
necessary.
● Check connector X503 on board DX1,
replace board DX1 if necessary.
● Check the CAN bus.
● Check ceph sensor holder, replace if
necessary.
Actions required
E5 81 75
● Run software update.
If the error occurs again...
● Check ceph sensor (replacement sensor),
replace sensor if necessary.
Sirona Dental Systems GmbH
Service Manual ORTHOPHOS SL
see
S. [ → 68]
see
S. [ → 68]
see
S. [ → 68]
see
S. [ → 153],
S. [ → 404],
S. [ → 396],
S. [ → 391]
see
S. [ → 153],
S. [ → 404],
S. [ → 396],
S. [ → 141],
S. [ → 391]
see
S. [ → 68]
64 95 258 D3632
D3632.076.01.03.02 09.2016