9 Repair
9.12 Sensor unit
A
A
B
390
9.12.4
Replacing fan package
1. Remove the cover of the sensor unit.
2. Loosen the cable of the defective fan package (B) from the cable
holders on the sensor unit and pull it out from connector X1000 on
board DX83.
3. Loosen the two screws (A) and remove the defective fan package.
4. Attach the new fan package in the reverse order to disassembly.
5. Re-attach the cover of the sensor unit.
Sirona Dental Systems GmbH
Service Manual ORTHOPHOS SL
64 95 258 D3632
D3632.076.01.03.02 09.2016