Hydrocolloid; Connecting/Removing The Hydrocolloid - Sirona teneo Operating Instructions Manual

4 Operation
4.6 Assistant element
156
4.6.8

Hydrocolloid

Hydrocolloid impressions of the upper and lower jaw can be made using
the coolable impression tray. The molding compound hardens quickly
due to the cooling.
4.6.8.1

Connecting/removing the hydrocolloid

The scope of delivery also includes two quick-release couplings. The
hoses (diameter 4 mm), hose adapter, and impression tray can be
ordered from a specialized dealer.
Connecting the hydrocolloid
The hydrocolloid is connected to the bottom of the assistant element with
two quick couplings.
✔
The assistant element is equipped with a hydrocolloid connection.
➢ Plug the two fast couplings A of the impression tray into the sockets
B on the bottom of the assistant element in any order.
 Both quick couplings are engaged in the sockets.
Removing the hydrocolloid
➢ Hold the hose with one hand while you slide the snap-on ring C
upward with the other.
 The hose is released and can be removed downward.
C
Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
65 48 510 D3509
D3509.201.03.03.23 10.2016