Sirona ORTHOPHOS SL 2D Service Manual page 70

4 General operating procedures
4.5 Updating the unit firmware
70
After the firmware update, the message window in the update
menu shows whether the update was successful or not. In
addition, a message in the software manager notifies you that a
unit restart is required to activate the firmware update you
performed.
NOTICE
Effectiveness of the firmware update
The unit must be restarted after every firmware update. A new DX11 or
DX83 version will run only after the unit has been rebooted (see also
chapter "Measures following replacement of boards [ → 398]").
Any errors with the consecutive numbers 01, 03, 04, 06, or 07 displayed
immediately following the firmware update may be ignored. If these
messages appear again after the system is rebooted, please carry out
troubleshooting as described in the "List of error messages [ → 84]"
section.
If any conspicuous problems occur in connection with system handling
after the firmware update and unit reboot has been completed, please
repeat the firmware update immediately.
After a successful firmware update, the log file produced by the
unit is displayed in the update menu. In addition, the log file is
stored on the PC, on which the
under the device name in the following directory:
"ProgramData ⇒ Sirona ⇒ AcquisitionServer ⇒ SWLog"
8. Check the log file to make sure that the update was completed
successfully. If the log file contains entries such as "Update of DXxx
failed!", please repeat the update. Repeat this procedure as often as
necessary until the "failed messages" no longer appear.
9. Restart the unit now.
"Device details"
10. Use the
modules have the current program version (see section "Firmware
[ → 45]").
11. If you want to save the
"Device details"
– Open the
"Show Information"
– Click on the
"Download"
– Click on the
– Select the storage location you desire.
"Save"
– Click on the
"Device details"
The
Sirona Dental Systems GmbH
Service Manual ORTHOPHOS SL
"Acquisition Server"
or service routine S008.2 to test whether all
"Device details"
:
[ → 59].
button.
button.
button.
are stored as txt files.
D3632.076.01.03.02 09.2016
is installed
64 95 258 D3632