Sirona Dental Systems GmbH
Service Manual ORTHOPHOS SL
H
64 95 258 D3632
D3632.076.01.03.02 09.2016
A
B
4. Loosen the 4 screws (B) and unhinge the DCS sensor from the lugs
(A) of the rotation unit.
5. Pull the fan package line off connector X1000 from board DX83 .
6. Loosen the two screws (H) and disconnect the cover plate (I).
7. Place the DCS sensor on a flat surface with the heatsink (L) facing
upwards.
8. Loosen the 4 screws (J).
I
H
K
J
J
J
9 Repair
9.12 Sensor unit
J
L
387