Sirona Dental Systems GmbH
Service Manual ORTHOPHOS SL
64 95 258 D3632
D3632.076.01.03.02 09.2016
Replacing fiber-optic cable L5, L6 or L15
9.16.2.1
1. Remove the defective fiber-optic cable.
2. NOTICE! Do not kink or twist fiber-optic cables, the bending radius
may not be less than 20mm, otherwise it is at risk of breaking!
Clip the two parts of the first radius limiter (A) close to the connector,
which is plugged onto board DX1 onto the cable.
3. Plug the connector of the new fiber-optic cable to the same color
assignment on the board DX1.
4. Lay the fiber-optic cables up to point (B), and clip the two parts of the
second radius limiter (A) at point (B) (approx. 900 mm from the
connectors on DX1) onto the cable.
5. Guide the fiber-optic cable to board DX6 and plug the connector of
the new fiber-optic cable to the same color assignment on board DX6.
9 Repair
9.16 Cable
405