9 Repair
9.6 Control panel
350
5. Update the nameplate at the control panel cover.
To do so, affix the supplied label as shown in the figure.
9.6.1.1
What has to be done after replacing the user interface?
IMPORTANT
So that the board is also replaced with the user interface, you MUST
also follow the instructions in the section titled "Measures following
replacement of boards [ → 398]".
1. Check that the user interface and the display elements are
functioning correctly: When the unit is switched on, all of the display
elements must light up briefly.
2. Perform a software update to the latest version.
Sirona Dental Systems GmbH
Service Manual ORTHOPHOS SL
64 95 258 D3632
D3632.076.01.03.02 09.2016