9 Repair
9.2 Height adjustment motor (M1_4)/spindle
294
9.2.2
Removing board DX32
1. Unscrew the bracket (C) which is located in front of board DX32.
Removing board DX32
2. Move the stand to a height of 1260 (Easypad display)
3. Disconnect GALILEOS from the power supply.
4. Remove the cable ties (A) from cable L2.
5. Loosen all the left-hand screws (B) of the protective plates (E).
Sirona Dental Systems GmbH
Service Manual GALILEOS
61 25 665 D3437
D3437.076.01.15.02 06.2012