Test Exposures; Pan - Diaphragm Test Exposure (2D) - Sirona ORTHOPHOS SL 2D Service Manual

Sirona Dental Systems GmbH
Service Manual ORTHOPHOS SL
64 95 258 D3632
D3632.076.01.03.02 09.2016
10.11.2 2D test exposures

Pan - diaphragm test exposure (2D)

10.11.2.1
You can use the
adjustment of the Pan - diaphragm adjustment [ → 187].
1. Call up the
2. Select the
structure tree under
In the action area, the menu appears to create the
diaphragm control exposure"
3. Click on the
Exposure readiness is established. A dialog window displays the
status of readiness to exposure.
The service routine used for the corresponding exposure is
displayed on the control panel, along with the specific exposure
parameters.
4. Press the release button. Press and hold down the button until the
exposure is complete, the preview image is displayed in the exposure
window, and the acoustic signal that indicates the end of the
exposure (double beep) sounds (if configured).
The exposure is displayed in the exposure window.
For notes on evaluating the exposure, refer to the section "Unit
adjustment and calibration [ → 160]"/"Pan aperture adjustment
[ → 187]".
"Pan - diaphragm control exposure"
"Control exposures"
menu [ → 428].
"Pan - diaphragm control exposure"
"2D control exposures"
.
"Start acquisition"
button.
10 Maintenance
10.11 Test exposures/Test images
to check the
element in the
.
"Pan -
429