Steering Lower Shaft - Removal And Installation - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

Steering Lower Shaft - Removal and
Installation
1. Unscrew the upper bolts on the steering lower shaft.
2. Unscrew the lower shaft bolts to steering gear box and
remove the steering lower shaft.
Notice
Place an alignment mark.
3. Installation Notice
Install the steering lower shaft into the steering column
shaft and gear box with aligning the marks.
Upper bolt (column side)
Lower bolt (gear box side)
Notice
Make sure to align the ball and alignment mark while
installing the lower shaft.
STEERING COLUMN
REXTON SM - 2004.4
25 ~ 30 mm
25 ~ 30 mm
6A-13
Y220_06A031
Y220_06A032
Y220_06A033
Y220_06A034
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN