SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 743

3A2-194
Valve Body
Notice
• Do not wash the nose of solenoids in solvent.
• Be aware of ball positions in the upper valve body.
• Be aware of 1-2 and 3-4 shift valve positions, they can be swapped.
• Check the 4-3 sequence valve and spring orientation.
• Check that the 12 mm ball is in the lower body.
• Check the line pressure relief valve for swarf, and be aware of replacing the shims.
• When servicing the transmission, ensure that the solenoid 5 damper spring is not broken.
• Locate the detent spring central to the detent lever.
• Wash the upper and lower valve bodies thoroughly with cleansing solvent and blow dry.
• Check the valve body cavities, ports and holes for damage or obstructions.
• The orifices in the valve body are for stability and safeguard. Do not drill them larger.
• Thoroughly wash all loose components.
• Check that all valves slide freely in their location.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
1. Install the detent lever locating pin
2. Install the Band Apply Regulator (BAR) valve, springs,
plunger and retaining pin.
Y220_3A21O0
3. Install the line pressure relief valve, tapered end first, spring
and disc. Secure with the retaining pin.
Y220_3A21P0
BTRA 4 AUTO TRANSMISSION
REXTON SM - 2004.4