SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 647

4-2. Remove the bolts in converter housing.
Installation Notice
Tightening torque
4-3. Remove the brake B1 from converter housing.
4-4. Separate the plate from valve body.
Notice
• Install two bolts on the opposite side of disc brake
B1 and tap the surface of disc brake B1 with plastic
hammer to remove it ftom converter housing.
• Align the dowel pin (arrow) on disc brake B1 and
groove in converter housing when installation.
• Apply the sealant on the socket bolts and tighten
them.
5. Unscrew the bolts and remove the oil pump.
Installation Notice
Tightening torque
Notice
Install two bolts on the opposite side of oil pump
housing and tap the surface of oil pump with plastic
hammer to remove it from converter housing.
DC 5-SPEED AUTOMATIC TRANSMISSION
REXTON SM - 2004.4
8 Nm
20 Nm
3A1-95
Y220_3A1135
Y220_3A1136
Y220_3A1135
Y220_3A1135
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN