SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 1111

INSPECTION
WHEEL BEARING END PLAY
1. Release the parking brake.
2. Raise the rear wheel.
3. Check if the wheel bearing end play exists while rocking
the wheel.
End play
4. If the end play exists, retighten the slotted nut.
5. If the end play still exists, replace the wheel bearing.
WHEEL BEARING PRELOAD
1. Release the parking brake.
2. Raise the rear wheel and rotate it several times.
3. Remove the tire.
4. Hook a spring gauge on a hub bolt and pull it. Read the
scale on the gauge at the point when the drum starts to
move. It is preload.
5. Check if the preload is within the specified range.
Specified value
6. If the measured preload is out of the specified range,
retighten the slotted nut to the specified tightening torque.
7. If the trouble still exists, replace the wheel bearing with
new one.
REAR SUSPENSION
REXTON SM - 2004.4
0 mm
1.4 ~ 4.3 kg . cm
7B-15
Y220_07B028
Y220_07B029
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN