Speed Sensor - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

3D-34
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN

Speed Sensor

1. Disconnect the negative battery cable.
2. Remove the shift motor assembly.
3. Disconnect the front and rear speed sensor connector
(white, 4-pin) at the rear top section of the transfer case.
4. Disconnect the speed sensor connector from the locking
sleeve.
5. Remove the wire fixing retainer at the rear side of
disconnected connector.
Y220_03D041
6. Remove the rear speed sensor bolts on the rear case
flange.
Y220_03D042
7. Remove the rear speed sensor with a suitable tool.
Notice
Do not apply excessive force to protect mounting area
and sensor.
Y220_03D043
8. Remove the tapings in both sides of protective tube.
9. Remove the tube.
Y220_03D044
PART TIME
REXTON SM - 2004.4