Upper Arm And Lower Arm Assembly Removal - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

7A-14
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
UPPER ARM AND LOWER ARM AS-
SEMBLY
Removal
Preceding works:
• Remove the shock absorber assembly.
• Remove the steering knuckle (refer to Steering section).
1. Remove the slotted nuts and split pins from the upper
arm joint and the lower arm joint.
Note
Use only the special tool as shown in figure to
separate the ball joint and steering knuckle.
Y220_07A022
2. Remove the mounting bolts and nuts and separate the
upper arm from the frame bracket.
Y220_07A023
3. Remove the mounting bolts and nuts and separate the
lower arm from the frame bracket.
Y220_07A024
FRONT SUSPENSION
REXTON SM - 2004.4