Bearing; End Play Of Taper Roller Bearing - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

3B-22

Bearing

The needle bearings are introduced to each gear and the taper roller bearings are used for input and counter shaft in
transmission housing.
Taper roller bearing
1. Taper roller bearing
(input shaft, counter shaft and output shaft)
2. Needle bearings for 1/2 and 3/4 shift

End Play of Taper Roller Bearing

1. Taper roller bearing for input shaft
2. Taper roller bearing for counter shaft
Notice
Use the following spacers to adjust the end play (A or B) between input shaft and counter shaft.
(Specified range of end play: 0.05 ~ 0.1 mm)
• For input shaft: 0.75 ~ 1.45 mm (15 spacers with increment of 50 µm)
• For output shaft: 0.4 ~ 1.45 mm (10 spacers with increment of 50 µm)
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Needle bearing
3. Needle bearing for reverse gear
(with cut out area)
4. Needle bearing for 5th gear
A. End play A: 0.85 ~ 2.28 mm
B. End play B: 1.17 ~ 1.97 mm
Y220_03B024
Y220_03B025
TSM54/52 MANUAL TRANSMISSION
REXTON SM - 2004.4