SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 947

4A-12
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
7. Tighten the front disc brake caliper mounting bolts with
the front disc installed.
Tightening torque
Y220_04A024
8. Install the steering linkage end to steering knuckle and
tighten the slotted nut
Notice
Replace the split pin with new one.
Tightening torque
9. Install the wheel speed sensor
vacuum line (only for ABS equipped vehicle).
Y220_04A025
10. Install the tires and test the brake function.
85 ~ 105 Nm
.
Length of bolt
35 ~ 45 Nm
and connect the
192 ± 5 mm
FRONT AXLE
REXTON SM - 2004.4