SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 712

3A2-164
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
7. Remove the front servo cover circlip.
8. Remove the front servo cover, piston and spring.
Notice
The plastic servo block is retained by the piston return
spring only.
9. Remove the adaptor housing bolts and adaptor housing.
Y220_3A2520
10. Remove the pump to case bolts using a multi-hex 8 mm
spanner.
11. Using the pump puller 0555-336257, remove the pump
and pump cover.
Y220_3A2530
12. Remove the input shaft, forward clutch cylinder, and the
overdrive shaft as an assembly, withdrawing them through
the front of the case.
13. Remove the C3 clutch cylinder and sun gears.
Y220_3A2540
14. Remove the front band struts. Remove the front band.
Y220_3A2550
BTRA 4 AUTO TRANSMISSION
REXTON SM - 2004.4