Circuit Diagram And Connector Pin Arrangement; Stopping Esp Function With Esp Off Switch; Resuming Esp Function With Esp Off Switch - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

Circuit diagram and connector pin arrangement

Stopping ESP function with ESP OFF switch

If the driving wheels are slipping on the snowy or icy road, the engine rpm may not be increased even when you depress
the accelerator pedal, and accordingly, the driver may not start off the vehicle. In this case, stop the ESP function by
pressing the ESP OFF switch. When the ESP switch is pressed, the ESP function stops and the vehicle is driven
independently from the sensor outputs.

Resuming ESP function with ESP OFF switch

The ESP function is resumed when pressing the ESP switch again while ESP system is operating (ESP indicator "ON").
Notice
• The ESP system deactivates when stopping the engine. It will be resumed when the engine is started again.
• If the vehicle is controlled by ESP during driving, the ESP OFF switch will not work.
• If the ESP function operates while driving, the indicator lamp flickers and the alarm sounds.
• If the ESP warning light comes on, the ESP related system is defective.
At this moment, the ABS works in a basic way.
• If the ESP warning light and the ABS warning light come on simultaneously, both ESP and ABS system are
not working.
• If the ESP warning light flickers and the alarm sounds, it means that the vehicle stability is controlled by the
ESP function when vehicle stability is extremely unstable.
SWITCHES
REXTON SM - 2004.4
ESP Switch
ESP Unit
9D-7
Y220_09D142
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN