Oil Check And Specification; Checking And Adding Tip; Automatic Transmission Fluid Capacity And Specification - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

3A1-48

Oil Check and Specification

Checking and adding Tip

A. Place the vehicle on level ground. Pull out the lock
pin and remove the cap (add 4 to 5 liter if oil has
been completely drained out).
B. Place the selector lever to "P" position. Start the
engine and leave it idling (add 2.5 liter if oil has been
completely drained out).
C. Warm the engine up while moving the selector lever
to all positions. Check if the oil temperature is approx.
80°C with a scanner (apply the parking brake).
: Selector lever position - R or D
D. Check the oil level with oil dipstick while engine is
running in "P" position.
E. Check several times with attention, and add or drain
the oil as required.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Lock pin
Lock pin
Automatic transmission fluid capacity and
specification
Fluid capacity
Specification Fuchs ATF 3353 or Shell ATF 3353
DC 5-SPEED AUTOMATIC TRANSMISSION
Cap
Y220_3A1055
Approx. 8
REXTON SM - 2004.4