Coding On Tod Control Unit; What’s Coding?; Coding Required; Coding Method - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

3E-26
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN

CODING ON TOD CONTROL UNIT

What's Coding?
An input activity of data for the proper performance by match-
ing specification, devices and system with control unit.

Coding required

1. Replacement of TOD control unit.
2. Adjustment by input error.

Coding method

1. Check and record engine type, axle ratio and tire size.
2. Turn the ignition switch to "OFF" position.
3. Connect the scanner with diagnosis connector.
Y220_03E013
4. Turn the ignition switch to "ON" position.
5. Select "TOD" from "CONTROL UNIT SELECTION" screen
and press "ENTER".
6. Read the current memorized specification in TOD control
unit.
7. Compare memorized specification with the checked
record. If not matched, perform a coding.
8. Read again memorized coding specification in TOD
control unit for confirmation of coding.
9. Turn the ignition switch to "OFF" position.
10. After 5 seconds, turn the ignition switch to "ON" position.
11. Check coding specification whether it matches with
vehicle or not. If not, perform a coding again.
TOD
REXTON SM - 2004.4