SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 1064

5. Remove the dust cover (1) and retainer ring (2).
6. Remove the pinion dust cover (lower, 3) and unscrew the
pinion lock nut (4).
Notice
Before removing the pinion lock nut, make sure to
lock the pinion gear to prevent it from damaging.
7. Remove the steering pinion (5) from pinion bearing by
tapping the bottom end of steering pinion with a flat drift
and plastic hammer.
Notice
Align the center of the drift and the bottom end of
steering pinion.
8. Remove the pinion bearing (6) by tapping it with a long
and flat head drift and plastic hammer.
POWER STEERING
REXTON SM - 2004.4
6C-15
Y220_06C024
Y220_06C025
Y220_06C026
Y220_06C027
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN