SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 980

4B-16
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
2. Install the lateral rod to axle housing.
Notice
Do not fully tighten the nut.
Tightening torque 2
3. Install the shock absorber base to axle housing.
Tightening torque 3
Y220_04B032
4. Install the stabilizer bar, upper arm and lower arm to
axle housing.
Stabilizer bar cap bolt 1
Upper arm nut 2
Lower arm nut 3
Y220_04B033
5. Install the propeller shaft to rear axle.
Tightening torque
Y220_04B034
6. Install the brake cable, air breather hose, oil pipes and
LCRV device to rear axle assembly.
Air breather hose bolt
Brake oil pipe
7. Bleed the air from the brake system and install the tire.
Y220_04B035
150 ~ 180 Nm
LCRV bolt
50 ~ 65 Nm
30 ~ 45 Nm
150 ~ 180 Nm
150 ~ 180 Nm
70 ~ 80 Nm
12 ~ 23 Nm
6 ~ 8 Nm
15 ~ 19 Nm
REAR AXLE
REXTON SM - 2004.4