Dynamic Test For Injector Back Leak Volume - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

DI10-190

4-4. Dynamic Test for Injector Back leak Volume

1. Start the engine and warm up until the coolant temperature reaches to 60°C.
2. Remove the injector return hose and seal the openings with screw type caps (included in tool kit).
4. Start the engine and let it run for 2 minutes at idle speed.
5. Check if the back leak volume meets the specification.
Specified value
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
3. Install the hoses from back leak test containers to return
Y220_10081
Below 38 ml
nipples of injector.
Y220_10080
Y220_10082
DIAGNOSIS
DI ENG SM - 2004.4