SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 1067

6C-18
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
4. Install the rack bearing.
• Install the adjusting spring.
• Tighten the adjusting plug with a specified tightening
torque.
• Tighten the lock nut.
• Adjust the preload of steering gear.
Y220_06C032
5. Install the hydraulic pipes.
Y220_06C033
6. Install the tie rod end boot.
Notice
Apply grease into the ball joint of tie rod end and the
boot.
Y220_06C034
POWER STEERING
REXTON SM - 2004.4