SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 960

Inspection
1. Check the shaft spline for wear and damage.
2. Check the boot for crack and leaks by tearing.
3. Check the shaft for bend.
Notice
If any of shafts is defective, both shafts should be
replaced as a set since the other shaft is liable to be
affected.
Assembly
1. Assemble in the reverse order of disassembly.
2. Fill the specified grease in the joint housing.
Capacity
Notice
Use only specified grease. Otherwise, the joint and
boot may be damaged.
Notice
Replace the boot clamps with new ones.
3. Check whether the joint moves freely to any direction.
Check the clamping connections for leaks.
FRONT AXLE
REXTON SM - 2004.4
90 ~ 100 g
4A-25
Y220_04A063
Y220_04A064
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN