SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 703

Condition
Harsh 2-3 shift
Harsh 3-4 shift
BTRA 4 AUTO TRANSMISSION
REXTON SM - 2004.4
Possible Causes
• Jammed band 1 release valve.
• Faulty S3 or S2 solenoid.
• Faulty clutch apply regulator valve.
• Missing or damaged clutch apply
feed ball.
• Damaged input shaft sealing rings.
• Damaged C1 piston "O" rings.
• Damaged or dislodged C1 piston
bleedball.
• Faulty S1 or S4 solenoid.
• Jammed band 1 release valve.
• Incorrect front band adjustment.
• Damaged front servo piston "O"
rings.
• Faulty or damaged variable pressure
solenoid (S5).
• Faulty band apply regulator valve.
Action
• Inspect the release valve.
Repair or replace as necessary.
• Inspect S3 or S2. Repair or replace
as necessary.
• Inspect the regulator valve.
Repair or replace as necessary.
• Inspect the ball. Refit or replace as
necessary.
• Inspect the sealing rings. Refit or
replace as necessary.
• Inspect the "O" rings. Refit or
replace as necessary.
• Inspect the bleed ball. Refit or
replace as necessary.
• Inspect S1 or S4. Repair or replace
as necessary.
• Inspect the release valve.
Repair or replace as necessary.
• Inspect the band. Adjust as
necessary.
• Inspect the "O" rings. Refit or
replace as necessary.
• Inspect S5. Repair or replace as
necessary.
• Inspect the regulator valve.
Repair or replace as necessary.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
3A2-45