SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 644

3A1-92
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
7. Remove the ball bearing from transmission housing. 7. Remove the ball bearing from transmission housing.
• Install the flare clamping pliers. • Install the flare clamping pliers.
• Install the puller onto inner bearing race. • Install the puller onto inner bearing race.
• Rotate the clamping pliers counterclockwise (arrow • Rotate the clamping pliers counterclockwise (arrow
direction) to tighten. direction) to tighten.
Puller 001 589 50 33 00 Puller 001 589 50 33 00
Collet chuck 140 589 06 34 00 Collet chuck 140 589 06 34 00
• Remove the ball bearing from transmission housing • Remove the ball bearing from transmission housing
with spanner. with spanner.
Y220_3A1125 Y220_3A1125
8. Unscrew the socket bolts fastening converter housing 8. Unscrew the socket bolts fastening converter housing
and transmission housing and remove the transmission and transmission housing and remove the transmission
housing from converter housing. housing from converter housing.
Installation Notice Installation Notice
Tightening torque Tightening torque
Note
Slightly turn the transmission housing to left and right
direction to make the removal process easier.
Y220_3A1126 Y220_3A1126
20 Nm 20 Nm
DC 5-SPEED AUTOMATIC TRANSMISSION
REXTON SM - 2004.4