Shift Motor Removal And Installation - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

3E-36
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
SHIFT MOTOR
Removal and Installation
1. Disconnect the negative battery cable.
2. Disconnect the shift motor/electronic magnetic clutch
connector (black, 7-pin) and front and rear speed sensor
connector (white, 4-pin) at the rear top section of the
transfer case.
Y220_03E025
3. Disconnect the front and rear speed sensor connector
(white, 4-pin) from bracket.
Y220_03E026
4. Remove shift motor mounting bolts.
5. Remove bracket mounting bolt.
Notice
Remove two bolts for fixing the motor and bracket
before removing the shift motor and bracket.
Y220_03E027
TOD
REXTON SM - 2004.4