Warning Lamp And Indicator; Esp Warning Lamp Blinking In Control; Esp System Cancellation Using The Esp Off Switch - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

Table of Contents

Advertisement

8E2-34

WARNING LAMP AND INDICATOR

(1) ESP warning lamp blinking in control

ESP warning lamp blinks when ESP control is activated. If the activation reaches a certain limitation, a beep sounds to
warn the driver. The ESP warning lamp goes off when ESP function is deactivated. Even when the ESP is operated for
a very short period of time, the ESP warning lamp blinks minimum of 4 times every 175 milliseconds and the buzzer
sounds for at least 1.4 seconds with 100 ms interval.
ESP operation
(including ASR)
ESP warning lamp
ESP buzzer

(2) ESP system cancellation using the ESP OFF switch

When the ESP switch at the center switch panel is pushed (for over approximately 150 ms), the ESP system will be
cancelled and the vehicle will be driven regardless of the output values from the corresponding sensors. Then, the ESP
warning lamp on the instrument panel comes on.
The detailed operation procedures are as follows:
1) The ESP warning lamp comes on when the ESP OFF switch is pushed for over 150 ms.
2) The switch returns to normal position when the OFF switch is released.
3) The ESP system will be cancelled after approximately 150 ms.
Based on the above procedures, we can see that the ESP system will be cancelled after a certain period (approx. 150
ms) from releasing the switch to the original position. The ESP system does not get canceled immediately when the
ESP warning lamp is turned on by pressing the ESP OFF switch.
When you turn the ESP system off by pressing the ESP switch for over 150 ms, the TCS system is turned off. And the
basic ABS system will operate.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
ON
OFF
ON
OFF
ON
OFF
Min. 4 times
Min. 1.4 sec
Y220_8E2058
ESP SYSTEM
REXTON SM - 2004.4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save PDF